Oracle/Fujitsu 7060790 600GB 10,000 RPM 2.5″ SAS-2 HDD with M10 Series Bracket

Description

The Oracle/Fujitsu 7060790 is a 600GB 10,000 RPM 2.5-inch SAS-2 hard disk drive assembly supplied with a Fujitsu M10 Series bracket. It is designed as an enterprise server storage component for compatible Fujitsu/Oracle SPARC M10 systems.

Fujitsu’s official SPARC M10 product documentation identifies the corresponding 600GB SAS HDD configuration as a 2.5-inch, 10,000 RPM SAS-2 hard disk with a Fujitsu bracket. The documentation lists the M10-compatible 600GB HDD options for the Fujitsu M10-1 and M10-4S platforms.

The Oracle product catalog separately identifies the 600GB 10,000 RPM 2.5-inch SAS-2 HDD with Fujitsu M10 Series bracket as an M10 Server X-Option.

Key Features

• Oracle/Fujitsu Part Number: 7060790
• Capacity: 600GB
• Drive Type: Enterprise SAS Hard Disk Drive
• Interface: SAS-2
• Spindle Speed: 10,000 RPM
• Form Factor: 2.5-inch
• Includes: Fujitsu M10 Series drive bracket
• Platform Family: Fujitsu/Oracle SPARC M10
• Designed for enterprise server storage
• Suitable for replacement, maintenance, and storage expansion
• Platform-specific drive assembly

600GB Storage Capacity

With 600GB of storage capacity, the 7060790 provides a practical balance between storage capacity and performance for enterprise server applications.

The drive is intended for use within compatible M10 server configurations and can be used as a replacement or additional storage device where the server’s supported drive configuration permits.

10,000 RPM Performance

The drive operates at 10,000 RPM, providing faster rotational performance than conventional lower-speed enterprise hard drives.

The 10K RPM specification is particularly relevant for server environments where responsive disk access is important for workloads such as:

• Enterprise applications
• Databases
• Business systems
• Server operating systems
• Frequently accessed data
• Transaction-oriented workloads

Actual system performance will depend on the server, storage controller, RAID configuration, workload, and overall storage architecture.

SAS-2 Enterprise Interface

The 7060790 uses the SAS-2 (Serial Attached SCSI 2) interface, an enterprise storage interface designed for server and data-center environments.

SAS provides the connectivity and management characteristics expected in enterprise storage platforms and is different from consumer SATA storage. The drive should therefore be installed in a system and storage architecture that specifically supports the appropriate SAS interface.

Fujitsu’s SPARC M10 documentation identifies the 600GB drive configuration as a SAS-2 HDD.

2.5-Inch Form Factor

The compact 2.5-inch form factor is designed for enterprise server environments where storage density and efficient use of chassis space are important.

The included Fujitsu M10 Series bracket allows the drive assembly to be installed in the appropriate supported M10 server drive bay.

Fujitsu M10 Series Bracket

A key feature of this product is the inclusion of the Fujitsu M10 Series bracket.

The bracket is part of the server-specific drive assembly and provides the mechanical mounting interface required for installation into compatible M10 server hardware.

Fujitsu documentation describes the compatible 600GB drive as a 2.5-inch SAS-2 HDD with Fujitsu bracket.

This is important when sourcing replacement drives because a bare 2.5-inch SAS HDD may not provide the correct mounting hardware for an M10 server.

Compatible Fujitsu/Oracle M10 Platforms

Fujitsu’s official product documentation lists the 600GB 10,000 RPM 2.5-inch SAS-2 HDD with Fujitsu bracket as installable in:

• Fujitsu M10-1
• Fujitsu M10-4S

Fujitsu’s product notes also identify the 600GB SAS disk drive family used with SPARC M10 systems and reference Fujitsu/Oracle product IDs associated with these drives.

Compatibility should always be verified against the exact server configuration and existing drive part number before installation.

Technical Specifications

The 600GB, 10,000 RPM, 2.5-inch SAS-2 specifications and M10 bracket configuration are documented by Fujitsu for the SPARC M10 platform.

Enterprise Server Storage

The 7060790 is designed for professional server environments rather than general desktop use.

Its combination of:

• 600GB capacity
• 10,000 RPM spindle speed
• SAS-2 interface
• 2.5-inch enterprise form factor
• Fujitsu M10 Series mounting bracket

makes it suitable for maintaining compatible enterprise server storage configurations.

Replacement Applications

The 7060790 can be used as a replacement drive in compatible M10 systems when an existing HDD has failed or requires replacement.

It is also suitable for organizations maintaining spare drives for enterprise infrastructure, allowing a failed storage device to be replaced with a matching platform-specific drive assembly.

Typical applications include:

• Server repair
• Data-center maintenance
• Storage replacement
• M10 system refurbishment
• Enterprise hardware lifecycle management
• Spare-parts inventory
• Server storage expansion
• IT infrastructure restoration

RAID and Storage Configurations

The drive may be used as part of an appropriately configured enterprise storage subsystem where supported by the server and storage controller.

When replacing a drive in an existing RAID array, administrators should verify:

• Drive capacity requirements
• SAS interface compatibility
• RAID controller requirements
• RAID level
• Sector format
• Drive firmware
• Existing drive model and configuration
• Server-specific storage guidelines

A replacement drive should meet the requirements of the existing storage configuration before being added to an array.

Product Benefits

600GB Enterprise Storage

Provides 600GB of storage capacity for compatible enterprise server configurations.

10K RPM Performance

The 10,000 RPM spindle speed is designed for responsive enterprise disk workloads.

SAS-2 Interface

Uses the enterprise-oriented SAS-2 interface for supported server storage environments.

M10 Series Bracket Included

Supplied as a server-specific assembly with the Fujitsu M10 Series mounting bracket.

Platform-Specific Design

Designed for compatible Fujitsu/Oracle SPARC M10 server configurations.

Useful as a Replacement Drive

An appropriate choice for maintaining compatible M10 systems and replacing failed or aging storage devices.

Compatibility Considerations

Verify compatibility before purchasing.

Customers should confirm:

• Exact Fujitsu/Oracle server model
• Existing drive part number
• SAS-2 support
• 2.5-inch drive-bay compatibility
• M10 Series bracket compatibility
• RAID/storage-controller requirements
• Drive firmware requirements
• Existing storage configuration

Fujitsu’s documentation specifically lists the 600GB 10,000 RPM SAS-2 drive with M10 bracket for M10-1 and M10-4S configurations.

The fact that a server accepts a 2.5-inch SAS drive does not necessarily mean that every 2.5-inch SAS drive is mechanically, electrically, or firmware-compatible with the system.

Important Note on Part Numbers

Fujitsu’s official documentation distinguishes between different product IDs for 600GB SAS HDD configurations, including 7105508 for factory installation and 7105571 as an M10 Server X-Option.

The product requested here is identified as 7060790, so customers should verify the exact label and assembly part number on the physical drive before ordering. This is especially important when sourcing legacy Oracle/Fujitsu enterprise hardware, where multiple related drive assemblies may exist.

Product Condition

The technical specifications above describe the product itself and should be independent of inventory condition.

For your online store, specify the actual condition of the individual unit, such as:

• New
• Used
• Tested
• Refurbished
• Manufacturer refurbished

If the drive has been tested, you may also specify the testing status and any applicable warranty separately.

Ideal For

The Oracle/Fujitsu 7060790 is ideal for:

• Fujitsu SPARC M10 systems
• Oracle/Fujitsu enterprise infrastructure
• M10-1 server maintenance
• M10-4S server maintenance
• Data-center storage replacement
• Enterprise HDD upgrades
• Server refurbishment
• IT hardware service providers
• Spare-parts inventories
• Legacy infrastructure support

Product Summary

The Oracle/Fujitsu 7060790 600GB 10,000 RPM 2.5-inch SAS Disk Drive Assembly is an enterprise-class storage component designed for compatible Fujitsu/Oracle SPARC M10 server configurations.

With a 600GB capacity, 10,000 RPM spindle speed, 2.5-inch form factor, SAS-2 interface, and Fujitsu M10 Series bracket, the assembly is suited for enterprise server storage replacement, maintenance, refurbishment, and supported expansion applications.

Fujitsu’s official SPARC M10 documentation confirms the 600GB 10,000 RPM 2.5-inch SAS-2 HDD with Fujitsu bracket as an installable storage option for the M10-1 and M10-4S platforms.

Part Number: 7060790
Capacity: 600GB
Speed: 10,000 RPM
Interface: SAS-2
Form Factor: 2.5-inch
Bracket: Fujitsu M10 Series
Platform: Fujitsu/Oracle SPARC M10
Application: Enterprise Server Storage
Use: Replacement / Maintenance / Expansion