Micron MTFDKCC1T9TFR — 1.92TB 7450 PRO U.3 NVMe Enterprise SSD

Description

The Micron MTFDKCC1T9TFR is a high-performance 1.92TB enterprise solid-state drive belonging to Micron’s 7450 PRO Series. It is engineered for modern data-center and enterprise environments requiring high-speed NVMe storage, consistent performance, low latency, and enterprise-grade endurance.

The drive uses a U.3 2.5-inch 15mm form factor with a PCIe Gen4 x4 NVMe interface, making it suitable for compatible enterprise server backplanes and storage architectures. Micron identifies the 1T9 capacity code as 1.92TB, while CC identifies the U.3 2.5-inch 15mm form factor and FR identifies the 7450 PRO family.

The corresponding 1.92TB 7450 PRO configuration delivers up to 6,800MB/s sequential read and 2,700MB/s sequential write performance, with up to 800K random-read IOPS and 120K random-write IOPS. The drive uses Micron 3D TLC NAND and is rated at 1 DWPD, making it well suited to mainstream enterprise workloads such as databases, virtualization, cloud applications, boot storage, and primary data storage.

The shortened part number MTFDKCC1T9TFR represents the base configuration. The complete suffix determines configuration-specific characteristics such as security/encryption and sector size. Micron’s catalog lists both Non-SED and SED/TCG Opal 2.0 versions of this capacity.

Complete Technical Specification

Specification	Details
Manufacturer	Micron
Part Number	MTFDKCC1T9TFR
Product Family	Micron 7450 PRO
Product Type	Enterprise NVMe Solid State Drive
Storage Capacity	1.92TB
NAND Technology	3D TLC NAND
Interface	PCIe Gen4 x4
Protocol	NVMe
NVMe Version	NVMe 1.4
Form Factor	U.3, 2.5-inch
Drive Thickness	15mm
Sequential Read	Up to 6,800MB/s
Sequential Write	Up to 2,700MB/s
Random Read	Up to 800,000 IOPS
Random Write	Up to 120,000 IOPS
Endurance	1 DWPD
Total Drive Writes	Approximately 3.65PBW
MTBF	Approximately 2,000,000 hours
Operating Temperature	0°C to 70°C
Average Read Latency	Approximately 80µs
Average Write Latency	Approximately 15µs
Sector Size	Configuration-dependent; complete part number should be verified
Encryption	Configuration-dependent; Non-SED and SED/TCG Opal 2.0 variants available
Power-Loss Protection	Yes
Target Workload	Read-intensive / mainstream enterprise workloads
Primary Applications	Boot, cache, databases, virtualization and primary storage
Installation	Compatible U.3 enterprise drive bay/backplane
Warranty	Configuration/reseller dependent; verify supplied complete MPN

Performance and endurance figures above correspond to the published 1.92TB 7450 PRO U.3 configuration.

Applications

The Micron MTFDKCC1T9TFR is well suited for:

Enterprise servers
Data-center infrastructure
Cloud computing
Server virtualization
Virtual Desktop Infrastructure (VDI)
SQL and NoSQL databases
Application servers
Server boot storage
Caching
Primary enterprise storage
Block and object storage
Cloud and object-storage platforms
OEM and system-integrator solutions

Micron’s 7450 PRO is positioned for mainstream cloud, SQL, NoSQL, VDI, server virtualization, and other enterprise workloads.

Compatibility

The MTFDKCC1T9TFR requires a host system supporting U.3 NVMe PCIe Gen4 storage.

Before installation, verify:

U.3-compatible server backplane
2.5-inch 15mm drive-bay support
PCIe Gen4 x4 NVMe connectivity
Server BIOS/UEFI NVMe support
NVMe-compatible RAID/HBA configuration, where applicable
Hot-swap capability, if required
Server manufacturer’s qualified-drive list
Correct complete Micron part-number suffix
Sector-size compatibility
Encryption/security requirements

Important: A standard 2.5-inch drive bay does not automatically support U.3 NVMe. The server backplane and controller must specifically support U.3 PCIe NVMe drives.