Cisco AIR-PWRINJ-60RGD2 60W Outdoor PoE Power Injector

Description

The Cisco AIR-PWRINJ-60RGD2 is a professional-grade 60W outdoor Power over Ethernet injector designed to provide reliable electrical power and network connectivity to compatible Cisco outdoor wireless access points.

The injector combines 55 VDC power with Ethernet data and transmits both over the connected Ethernet cable to the access point. This enables outdoor wireless access points to be powered from a location where a PoE-enabled network switch may not be available, simplifying deployment and increasing installation flexibility.

The AIR-PWRINJ-60RGD2 is the international version of Cisco’s 60W outdoor injector and features an unterminated/blunt-end AC power cable, allowing the installer to provide the appropriate local AC connection according to the installation requirements. Cisco distinguishes it from the AIR-PWRINJ-60RGD1, which is supplied with a North American AC power plug.

Key Features

• Brand: Cisco
• Part Number: AIR-PWRINJ-60RGD2
• Product Type: Outdoor PoE Power Injector
• Power Rating: 60W maximum
• Input Voltage: 90–264 VAC
• Output Voltage: 55 VDC ±2%
• Maximum Output Current: 2.0 A
• PoE Standards: IEEE 802.3af and IEEE 802.3at
• Outdoor Protection: IP66
• Enclosure Rating: NEMA 4X
• Version: International / un-connectorized
• AC Cable: Blunt-end / unterminated
• Ethernet: 10/100/1000 Ethernet
• Recommended Network Cable: Shielded CAT5e or higher
• Operating Temperature: -40°C to 50°C
• Operating Humidity: Up to 95%, non-condensing
• Dimensions: 8.42 × 5.90 × 2.75 in. (214 × 150 × 70 mm)
• Weight: Approximately 2.98 lb (1.35 kg)
• Mounting: Wall or other suitable surfaces; optional pole-mount accessory available
• Compliance: RoHS, WEEE, CE, FCC Part 15, and applicable safety approvals

60W Power Delivery

The AIR-PWRINJ-60RGD2 provides up to 60 watts of power to a compatible access point. Cisco specifies a 55 VDC ±2% output with a maximum current of 2.0 A.

The injector combines the DC power supply with the Ethernet data connection, allowing the connected access point to receive both services through the same network cable.

This is particularly useful for outdoor wireless installations where the access point may be located away from a powered network switch.

Outdoor-Rated Construction

The AIR-PWRINJ-60RGD2 is specifically designed for outdoor applications. Cisco specifies an IP66 weather rating and NEMA 4X enclosure rating, providing protection appropriate for demanding outdoor installation environments.

The injector supports an operating temperature range of approximately -40°C to 50°C, making it suitable for deployments exposed to a wide range of environmental conditions.

International Version

The AIR-PWRINJ-60RGD2 is Cisco’s international version of the 60W outdoor injector.

Unlike the AIR-PWRINJ-60RGD1, which includes a North American AC power plug, the RGD2 uses a blunt-end/unterminated AC cable. This configuration provides flexibility for international installations where the appropriate AC termination is determined by local electrical requirements.

Important: The unterminated AC cable should be installed by a suitably qualified professional in accordance with applicable local electrical codes and safety requirements.

Ethernet Data and Power over One Cable

The injector simplifies outdoor wireless deployments by combining network data and electrical power on the Ethernet connection to the access point.

A typical installation consists of:

Network Switch → Ethernet Cable → AIR-PWRINJ-60RGD2 → Outdoor Ethernet Cable → Wireless Access Point

Cisco specifies that the injector connects to a 10/100/1000 Ethernet switch, hub, or network and uses a second shielded outdoor-rated Ethernet cable to carry power and data to the access point.

This arrangement can reduce installation complexity and eliminate the need for a separate local AC power source at the access-point mounting location.

Ethernet Cable Requirements

Cisco specifies the use of a shielded CAT5e or higher Ethernet cable between the network and injector.

For the injector-to-access-point connection, Cisco specifies a shielded outdoor-rated CAT5e or higher Ethernet cable, with a cable diameter of approximately 0.20–0.35 inches.

Cisco also specifies that the total Ethernet cable length from the access point through the network connection should not exceed approximately 100 meters (320–328 feet) under the documented installation conditions.

Compatible Outdoor Wireless Deployments

Cisco lists the AIR-PWRINJ-60RGD2 as a power option for multiple outdoor Cisco wireless platforms, including the Aironet 1540 and 1560 Series and newer compatible outdoor access points.

Compatibility should always be verified against the exact access-point model and its required power budget before installation.

IEEE PoE Support

The AIR-PWRINJ-60RGD2 supports IEEE 802.3af and IEEE 802.3at, providing compatibility with supported Power over Ethernet deployments.

Its 60W capacity makes it suitable for compatible access points that require more power than standard lower-power PoE injectors can provide.

Flexible Installation

The injector can be mounted on suitable horizontal or vertical surfaces. Cisco specifies that the unit should be installed in a vertical orientation for safety compliance.

For pole installations, Cisco provides the optional AIR-PWRINJ-60-PMK pole-mount bracket for the AIR-PWRINJ-60RGD1 and AIR-PWRINJ-60RGD2.

Environmental Protection

The rugged construction makes the AIR-PWRINJ-60RGD2 appropriate for outdoor wireless infrastructure where conventional indoor PoE injectors may not be suitable.

Cisco specifies:

• IP66 weather rating
• NEMA 4X enclosure rating
• -40°C to 50°C operating temperature
• Up to 95% operating humidity, non-condensing
• Up to 95% storage humidity, non-condensing

These characteristics make it suitable for outdoor network installations exposed to challenging environmental conditions.

Surge and Safety Protection

Cisco documentation specifies surge protection for the injector, including compliance with surge requirements referenced in GR-1089-CORE Issue 4 and ITU-T K.20, including specified protection on AC lines.

The injector is also identified with regulatory and safety compliance including UL60950-1, UL60950-22, GS Mark, CE, FCC Part 15, RoHS, and WEEE, according to Cisco’s documentation.

Technical Specifications

Specifications are based on Cisco’s official AIR-PWRINJ-60RGD2 documentation.

Ideal Applications

The Cisco AIR-PWRINJ-60RGD2 is well suited for:

• Outdoor enterprise Wi-Fi deployments
• Outdoor Cisco Aironet access points
• Industrial wireless networks
• Campus wireless infrastructure
• Transportation facilities
• Warehouses and logistics sites
• Utilities and infrastructure
• Public outdoor Wi-Fi
• Manufacturing environments
• Outdoor wireless mesh installations
• Locations where PoE is unavailable from the network switch

Product Benefits

60W Power Capacity

Provides up to 60W to compatible Cisco access points, supporting higher-power outdoor wireless deployments.

Outdoor-Rated Design

IP66 and NEMA 4X ratings provide protection suitable for outdoor installations.

International Configuration

The RGD2 version features an unterminated AC cable, making it suitable for international deployments where local AC termination is required.

Combined Power and Data

Delivers both Ethernet data and DC power over the same Ethernet cable, simplifying access-point installation.

Gigabit Ethernet Support

Supports connection to 10/100/1000 Ethernet infrastructure.

Wide Operating Temperature

Designed to operate from -40°C to 50°C, supporting deployments in challenging environmental conditions.

Flexible Mounting

Can be installed on suitable surfaces, with an optional Cisco pole-mount kit available.

Installation Considerations

For reliable operation, Cisco specifies the use of appropriate shielded Ethernet cabling and recommends that the total Ethernet distance remain within the documented maximum. The injector should be installed in the required orientation and properly grounded/installed according to applicable safety requirements.

Because the AIR-PWRINJ-60RGD2 has an unterminated AC cable, professional installation is recommended.

The exact Cisco access point being powered should also be checked to ensure that its power requirements are compatible with the injector.

Product Summary

The Cisco AIR-PWRINJ-60RGD2 60W Outdoor PoE Power Injector is a rugged and reliable power solution for compatible Cisco outdoor wireless access points. It combines 60W of power delivery, Gigabit Ethernet connectivity, IEEE 802.3af/802.3at support, IP66/NEMA 4X environmental protection, and a wide operating temperature range in a purpose-built outdoor enclosure.

The international RGD2 configuration with an unterminated AC cable makes this model particularly suitable for international outdoor wireless infrastructure projects where local AC termination is required.

Brand: Cisco
Part Number: AIR-PWRINJ-60RGD2
Type: Outdoor PoE Power Injector
Power: 60W
Output: 55 VDC ±2%
Input: 90–264 VAC
PoE: IEEE 802.3af / 802.3at
Ethernet: 10/100/1000
Protection: IP66 / NEMA 4X
Operating Temperature: -40°C to 50°C
Configuration: International / Blunt-End AC Cable